Mansour Mining Technologies Inc. Products |
GROUND SUPPORT
Friction Set Stabillizers
Technical Specifications
|
| The Friction-Set Stabilizer is the latest bolt design with unique manufactured qualities: |
| |
- The tubes are custom formed to our exact specifications and tolerances.
- The head or ring is formed and does not undergo any welding process.
- The FS33, FS35 and FS39 are available in plain or pre-galvanized steel.
- The FS46 is available in plain or post galvanized steel.
|
| Installation Factors |
| |
| |
| The Friction-Set stabilizer is designed to have an initial pull out strength ranging from 3 to 10 tons depending on the bolt type and length. Please refer to the above specifications when choosing a bit. Factor that affects anchorage strength is bit diameter, ground type and length of bolt. Certain rock formations, when drilled, can result in a larger than expected hole size that can affect the anchorage strength. We recommend that pull tests be done in the various rock types to determine the effectiveness of the support. |
| |
| Meets or exceeds CSA-M430-90 and ASTM F-432 specifications. |
| |
| SEE THE GROUND SUPPORT SECTION FOR THE PROPER WASHER PLATE TO BE USED OR CONTACT A MNASOUR MINING TECHNOLOGIES INC. REPRESENTATIVE FOR ADDITIONAL INFORMATION. |
|
|
|
Leadership Team
|
Sudbury, Ontario - Map it
2502 Elm Street,
PO Box 640 STN B,
Sudbury, ON, P3E 4P8
Phone: 705.682.0671
Fax: 705.682.4658
|
Val D'Or, Quebec - Map it
155 Rue Des Distributeurs,
Val D'Or, Quebec, J9P 6Y1
Phone: 1.819.824.8880
Fax: 1.819.824.8001
|
Chihuahua, Mexico - Map it
Av. Rudyard Kipling No.11311,
Complejo Industrial Chihuahua,
Chihuahua, Mexico, 31109
Phone: 011.52.614.482.0820
Website: www.mansour.mx
|
|
